HomeStore

MODE x BT Moto Stage 1+ Performance Calibration With Handheld Tuner - BMW R nineT (2014-2020)

MODE x BT Moto Stage 1+ Performance Calibration With Handheld Tuner - BMW R nineT (2014-2020)

 

NOTE: You MUST have a Windows based PC or Mac running Parallels to use and install this product.

Description

THIS PRODUCT IS 50 STATE LEGAL (C.A.R.B. EO# D-868-4)

MAKE SURE TO REVIEW THE TABS ABOVE: HANDHELD, DYNO RESULTS, RESOURCES AND MORE INFO!

WHAT'S INCLUDED IN STAGE 1

Stage 1 focuses on de-restricting the R nine T and optimizing it for best performance, without sacrificing reliability

  • 4% horsepower gain / 4% torque on pump fuel
  • Smoothing of the part throttle rideability and idle along with decel jerk removed
  • Ability to ride bike at lower or mid-RPM’s without bucking and jerking found in factory tune
  • Lower temperatures while riding
  • Stronger idle speed to combat stalling on warm up
  • Reshaped torque model for more power at all RPM’s part or full-throttle
  • Ignition timing tables optimized for every fuel
  • Fueling adjusted for power increase and cooler running engine
  • Cold and warm start issues eliminated
  • Known flat spots removed from entire RPM range
  • Speed limiters and rev-limit adjusted higher for maximum power and performance (a big factor in the 1200)
  • Throttle valve optimized for throttle response (a big factor in 1200)
  • Mapping available for aftermarket exhaust systems or air filter modifications
  • Exhaust valve open for better sound
  • Endorsed and used on his race bikes by factory rider Nate Kern
  • 50 state legal

Review Video

NATE KERN'S BT Moto R nine T

MODE ECU Tuning Includes:

  • Horsepower - More horsepower throughout the whole rpm band
  • Torque - More torque throughout the whole rpm band
  • Fuel Grades - Suitable tuning for the fuel octanes that you use
  • Stages 0 to Stage 3 - Multiple performance levels to suit installed hardware
  • Acceleration - Accelerate faster with more power and reduced throttle lag
  • Linear Throttle - Throttle maps adjusted for a more linear feel

MODE ECU Options:

  • Speed Limiter - Removes any speed limiters, great for track days
  • Standing Limiter - Increased standing limiter for higher revving at idle
  • Motorsport Hard-Limiter - With the soft limiter removed, you’ll get full power right up to the hard, “bap bap bap” redline fuel cut
  • Exhaust Burbles/Crackle - Multiple exhaust crackle profiles including factory, mild, and aggressive all with drive mode switching and component protection
  • Economy - While cruising, or driving normally, your fuel economy may benefit from our optimised calibration
  • Direct Port Programming - Clean and easy install through the OBD port without removing the ECU
  • MODE Guarantee - 14 day money back guarantee

DYNO TESTING

DYNO PROVEN

RED = STOCK (79whp / 68wtq)

BLUE = STAGE 1 (86whp / 78wtq)





THE BT MOTO HANDHELD TUNER

BT MOTO HANDHELD PERFORMANCE TUNER AND WHAT ARE THE BENEFITS OF HAVING ONE?

Custom tuning at your finger tips on your schedule.  Read and write your own motorcycles ECU from the comfort of your home. No need to bring your bike to a shop, our easy to use handheld can be used in your spare time with quick turn around. You now have a virtual custom personal tuner at your finger tips. Thoroughly tested by our own engineers, not just for its function but also durability, our easy to use handheld is just what you'll need to help get the most from your motorcycle!  

CAN I JUST SEND IN MY ECU FOR FLASHING AND SPEND LESS? LET'S GO OVER THE ADVANTAGES.

  • NO DOWNTIME - No need to send in your ECU or remove it from your bike at all.  You order the handheld, it get's delivered to you nearly instantly, and you flash your bike on your time easily.  You never miss a day of riding and no effort removing the ECU. Any issues, you can revert back to the full stock state.
  • READ AND CLEAR CHECK ENGINE LIGHTS - Full code reading diagnostics included in the device.
  • STORE MULTIPLE MAPS - When you send in your ECU, you only get one map.  You might be thinking, "why would I need more than one map?".  Storing multiple maps means you're able to flash for different configurations.  If you're a serious track competitor, we can work with you to get you different mapping for different tracks.  If, for example, you're add modifications to your stock bike, we can email you a file that takes the new exhaust into account with the changes you need to optimize your bike's new modifications with no mailing needed.
  • GO BACK TO STOCK ANYTIME - Not only can you store multiple files, you can also flash the original, stock file back into the bike at any time and for any reason for service, sales, and more.
  • ABILITY TO TUNE FUTURE BIKES - Customers swap bikes all the time! With our handheld tuner, you are able to put the first bike back to stock, then reset the device and use the same device on your next bike, with a simple and low cost transfer fee.
  • ANY ISSUES? We can resolve nearly anything remotely really quick with our engineering staff.

RESOURCES/DOWNLOADS

Resources Downloads

COMPATIBILITY

twitter

  • BMW R nine T (14-20, ALL MODELS)

DOCUMENTS

Device Reset FAQ and How-To PDF
CLICK HERE TO DOWNLOAD
BT Moto Handheld Instructions
CLICK HERE TO DOWNLOAD
BT Moto Flasher+ Troubleshooting Guide
CICK HERE TO DOWNLOAD
$372.94

Original: $1,065.55

-65%
MODE x BT Moto Stage 1+ Performance Calibration With Handheld Tuner - BMW R nineT (2014-2020)

$1,065.55

$372.94
Product image 1
Product image 2
Product image 3
Product image 4

Description

 

NOTE: You MUST have a Windows based PC or Mac running Parallels to use and install this product.

Description

THIS PRODUCT IS 50 STATE LEGAL (C.A.R.B. EO# D-868-4)

MAKE SURE TO REVIEW THE TABS ABOVE: HANDHELD, DYNO RESULTS, RESOURCES AND MORE INFO!

WHAT'S INCLUDED IN STAGE 1

Stage 1 focuses on de-restricting the R nine T and optimizing it for best performance, without sacrificing reliability

  • 4% horsepower gain / 4% torque on pump fuel
  • Smoothing of the part throttle rideability and idle along with decel jerk removed
  • Ability to ride bike at lower or mid-RPM’s without bucking and jerking found in factory tune
  • Lower temperatures while riding
  • Stronger idle speed to combat stalling on warm up
  • Reshaped torque model for more power at all RPM’s part or full-throttle
  • Ignition timing tables optimized for every fuel
  • Fueling adjusted for power increase and cooler running engine
  • Cold and warm start issues eliminated
  • Known flat spots removed from entire RPM range
  • Speed limiters and rev-limit adjusted higher for maximum power and performance (a big factor in the 1200)
  • Throttle valve optimized for throttle response (a big factor in 1200)
  • Mapping available for aftermarket exhaust systems or air filter modifications
  • Exhaust valve open for better sound
  • Endorsed and used on his race bikes by factory rider Nate Kern
  • 50 state legal

Review Video

NATE KERN'S BT Moto R nine T

MODE ECU Tuning Includes:

  • Horsepower - More horsepower throughout the whole rpm band
  • Torque - More torque throughout the whole rpm band
  • Fuel Grades - Suitable tuning for the fuel octanes that you use
  • Stages 0 to Stage 3 - Multiple performance levels to suit installed hardware
  • Acceleration - Accelerate faster with more power and reduced throttle lag
  • Linear Throttle - Throttle maps adjusted for a more linear feel

MODE ECU Options:

  • Speed Limiter - Removes any speed limiters, great for track days
  • Standing Limiter - Increased standing limiter for higher revving at idle
  • Motorsport Hard-Limiter - With the soft limiter removed, you’ll get full power right up to the hard, “bap bap bap” redline fuel cut
  • Exhaust Burbles/Crackle - Multiple exhaust crackle profiles including factory, mild, and aggressive all with drive mode switching and component protection
  • Economy - While cruising, or driving normally, your fuel economy may benefit from our optimised calibration
  • Direct Port Programming - Clean and easy install through the OBD port without removing the ECU
  • MODE Guarantee - 14 day money back guarantee

DYNO TESTING

DYNO PROVEN

RED = STOCK (79whp / 68wtq)

BLUE = STAGE 1 (86whp / 78wtq)





THE BT MOTO HANDHELD TUNER

BT MOTO HANDHELD PERFORMANCE TUNER AND WHAT ARE THE BENEFITS OF HAVING ONE?

Custom tuning at your finger tips on your schedule.  Read and write your own motorcycles ECU from the comfort of your home. No need to bring your bike to a shop, our easy to use handheld can be used in your spare time with quick turn around. You now have a virtual custom personal tuner at your finger tips. Thoroughly tested by our own engineers, not just for its function but also durability, our easy to use handheld is just what you'll need to help get the most from your motorcycle!  

CAN I JUST SEND IN MY ECU FOR FLASHING AND SPEND LESS? LET'S GO OVER THE ADVANTAGES.

  • NO DOWNTIME - No need to send in your ECU or remove it from your bike at all.  You order the handheld, it get's delivered to you nearly instantly, and you flash your bike on your time easily.  You never miss a day of riding and no effort removing the ECU. Any issues, you can revert back to the full stock state.
  • READ AND CLEAR CHECK ENGINE LIGHTS - Full code reading diagnostics included in the device.
  • STORE MULTIPLE MAPS - When you send in your ECU, you only get one map.  You might be thinking, "why would I need more than one map?".  Storing multiple maps means you're able to flash for different configurations.  If you're a serious track competitor, we can work with you to get you different mapping for different tracks.  If, for example, you're add modifications to your stock bike, we can email you a file that takes the new exhaust into account with the changes you need to optimize your bike's new modifications with no mailing needed.
  • GO BACK TO STOCK ANYTIME - Not only can you store multiple files, you can also flash the original, stock file back into the bike at any time and for any reason for service, sales, and more.
  • ABILITY TO TUNE FUTURE BIKES - Customers swap bikes all the time! With our handheld tuner, you are able to put the first bike back to stock, then reset the device and use the same device on your next bike, with a simple and low cost transfer fee.
  • ANY ISSUES? We can resolve nearly anything remotely really quick with our engineering staff.

RESOURCES/DOWNLOADS

Resources Downloads

COMPATIBILITY

twitter

  • BMW R nine T (14-20, ALL MODELS)

DOCUMENTS

Device Reset FAQ and How-To PDF
CLICK HERE TO DOWNLOAD
BT Moto Handheld Instructions
CLICK HERE TO DOWNLOAD
BT Moto Flasher+ Troubleshooting Guide
CICK HERE TO DOWNLOAD